Acer ProDesigner PE320QXT professional monitor review: Touchscreen functionality with a 6K resolution

In recent reviews of professional displays, I’ve talked about their function as content creation tools with reference color and the ability to integrate into video post-production and photography workflows. But there is a conceptual side that today’s monitors do not usually address. Designers and creators often collaborate and present their ideas, and for that, different display tools are needed. Things like touchscreens, tablet-style stands, and webcams are just as useful as standardized color modes and reference calibrations.

The Acer ProDesigner PE320QXT is such a monitor. It doesn’t have fast refresh or Adaptive-Sync, but it does have 219 ppi pixel density thanks to its 32-inch IPS panel with 6016 x 3384 resolution. It also has a Quantum Dot film for wide-gamut color that covers over 120% of DCI-P3. A 10-point capacitive touchscreen supports Microsoft Pen protocols. An integrated webcam lets users collaborate remotely. And a slick oleo stand lets the panel tilt back 60 degrees or stand up straight for a wide range of useful positions. Though exotic, it isn’t super expensive at $1,800 to start. Let’s take a look.

Acer ProDesigner PE320QXT Specs

6K resolution is somewhat rare, but I’ve seen a few such panels now, so it no longer has unicorn status. 6016 x 3384 is an in-between resolution that is not supported by video content. You won’t find 6K video anywhere. But it is useful for photography and CAD. It’s also great for presentation and conceptual graphics.

The PE320QXT’s maximum refresh rate is 60 Hz, so gaming with any sort of fast motion is impractical. But if your interest lies in titles that prioritize graphics over speed, 219ppi makes for a stunning image. Though the panel tech here is IPS, contrast is above average at over 1,500:1. HDR10 is also supported, though there is no zone dimming here so you won’t find much extra contrast for HDR content.

You will find lots of color though. The PE320QXT has one of the largest color gamuts I’ve yet encountered. In testing, I measured over 120% coverage of DCI-P3 and over 81% coverage of BT.2020. Adobe RGB gets a fair shake too with 96%. There are color modes to cover all current standards except for Cinema P3; however, Display P3 is included.

The PE320QXT forgoes the integrated calibration of other pro screens I’ve reviewed, but there is some tweakability in the OSD. You get Calman verification as well. I found all the preset modes to be reasonably accurate with just a few minor issues. I’ll talk more about that later.

Peripheral features include USB ports, types A, B, and C. There are four video inputs, two HDMI 2.1 and a DisplayPort 1.4 along with USB-C. Internal speakers play with five watts apiece, and there’s a headphone jack. A 4K webcam is mounted on the top and includes an angle adjustment knob and a cover for the lens. My sample shipped with a stylus that works with Microsoft protocols and can function as a pointing and drawing device. The screen is 10-point capacitive touch.

The PE320QXT is a different kind of professional display. It maintains color reference but is squarely aimed at designers and collaborators. At $1,900, it’s a decent value when you consider its unique abilities, extreme pixel density, and included extras.

Assembly and Accessories

The PE320QXT ships in fully recyclable packaging with molded pulp protecting the contents. The panel, upright, and base assemble without tools into a solid package. More on that unique stand in a moment. The webcam is permanently attached to the top of the panel. The pen comes in its own box with a USB charging cable for its Type-C port. Bundled cables include HDMI and USB, plus an external power supply brick.

Product 360

From the front, the PE320QXT looks like any other monitor, though it sits lower than most. That’s due to the oleo stand, which provides 60 degrees of tilt so you can angle the panel up like a tablet. The tilt extends five degrees forward as well. The height range is almost 10 inches, but if you want the panel to sit vertically in front of you, you’ll need a pedestal. You also get 360 degrees of swivel, with the base moving on a smooth bearing concealed within it. All movements are smooth and precise and befit a premium display.

The webcam sits atop the panel and is permanently attached. It has a little lens cover for security that slides left and right. You can roll a dial to angle the lens and tilt it completely backwards. The pen I received stows on the bottom of the screen magnetically and is compatible with Windows’ touchscreen protocols.

The screen’s front layer is very slick and shiny, perfect for drawing but not as good at preventing light reflection. You’ll need to be conscious of ambient light sources, especially when tilting the PE320QXT upwards. The image is very sharp and clear when no light hits it.

The ports are around the back and face rearwards. You get three USB ports, one upstream and two downstream. Video includes two HDMI 2.1 and a DisplayPort 1.4 plus a USB-C (DP Alt) port that supports 90 watts of power. There’s a 3.5mm headphone jack, and there are a decent pair of internal speakers, five watts each.

OSD Features

The PE320QXT uses buttons for OSD control. I found this a bit confounding since nearly every monitor today employs a joystick. Navigation is intuitive but slow. I also turned off the power accidentally a few times. Pressing any of the first four keys brings up a quick menu. Click button four for the full OSD.

The OSD is Acer ProDesigner standard and starts with basic image controls. The HDR option includes Off, Auto, and HDR600. I found that even on Auto, I had to manually select the HDR mode for HDR10 content. You’ll also want to turn on the Max Brightness option to get, you know…

In the Color menu, there are gamma and color temp presets for the General color space. These options are grayed out in the other color modes. They are found on the second screen under the Color Space sub-menu. There, you get Adobe RGB, sRGB, BT.709, DCI (Display P3 only), and HDR, which corresponds to BT.2020. General and HDR cover over 120% of DCI-P3 while the other modes are fairly close to their respective values. The picture modes include two calibration settings that can be any gamut and four memories which the user can select. In the Calibration sub-menu, you can specify two of the presets’ gamut selection.

Gaming’s single option is a two-level overdrive. It’s reasonably effective on its Normal setting, but there’s only so much it can do with a 60Hz refresh rate and no Adaptive-Sync.

The PIP/PBP menu gives you options for viewing two sources at once. You can size and move the PIP window and swap sources too.

In Save Settings to, four memory slots let the user assign configurations to four of the 10 picture modes.

Acer ProDesigner PE320QXT Setup And Hands-on

The PE320QXT can be calibrated in the OSD like a regular monitor in its User picture mode when the General color space is selected. This is the default setting, and its gamut covers a very colorful 120% of DCI-P3. I left the gamma preset on 2.2 and tweaked the RGB gain sliders for excellent grayscale tracking and no visible errors. To access other gamuts, use the Color Space option in the Color menu. The most used options are listed below with their color temp and gamma defaults. I noted that all of them grayed out the other picture controls so they cannot be calibrated in the OSD. You’ll see all test results on pages four and five.

For gaming and productivity, I stuck with the General color space and User mode with my calibration in place. I’ll deliver the spoiler first: the PE320QXT is not a monitor for fast-paced shooters. There is significant motion blur at 60 FPS to where aiming becomes difficult if you’re accustomed to faster screens. And there’s no Adaptive-Sync, though this wasn’t a significant issue since the frame rate never varied from 60. There is an overdrive option which reduces blur a little and works without ghosting on its Normal setting.

If your games are more like Myst, then you can have a spectacular time playing on the PE320QXT. The color is stunning with rich hues and bright primaries. The image is also razor sharp. 219ppi is a benefit you can plainly see when compared to the 140ppi of the same-sized Ultra HD monitor. You won’t be able to see the dot structure without a serious magnifying glass.

With a resolution like 6K, you must consider the original content. Nothing is mastered in 6K, so unless you’re playing a rendered game, there will be some upscaling. Watching 4K video was a good experience with clean rendering, but the frame rate is locked at 60Hz. There is no support for 24 or 50p cadences.

Rendered graphics are the PE320QXT’s strongest ability. I look forward to the day that 8K is a thing because 6K is so realistic already. Moving through a virtual environment suspends disbelief far more effectively than lower resolutions. Looking at CAD drawings and conceptual renderings is also much more useful with this much pixel density.

Color-critical work is also a good experience, but I wished for more flexibility in the PE320QXT’s OSD. You’ll see in the tests later that color and gamma are close to the mark, but grayscale tracking has errors that are just visible. This manifests more in neutral tones like clouds or snow. And black and white material has a slight color cast as well.

The touchscreen function is something I haven’t seen before in such a large monitor. To activate it, just make a USB connection between the PE320QXT and the PC. I could use my finger or the included stylus to act as a pointing and drawing device. It was handy to store the stylus on its magnetic strip across the bottom of the screen. The webcam was also very cool. It rotates enough that you can keep your face centered in the frame regardless of the panel’s position. With 60 degrees of tilt, it can almost lie flat, which is great for use while standing. The stand is super solid and flexible and lets you put the monitor in almost any position. 360 degrees of swivel means that you’re only limited by cables when swinging the monitor about.

Takeaway: The PE320QXT acquits itself well as a collaboration and design tool. It isn’t quite a reference display for video postproduction or photography, though it supports those color spaces correctly to the point where you could use it for presentation. Gaming isn’t its forte with a 60Hz limit, but the overdrive was effective at reducing motion blur. The tablet feature and flexible stand are its most usable assets since you can work in a group while standing or sitting. The webcam also makes collaboration easy.

MORE: Best Gaming Monitors

MORE: How We Test PC Monitors

MORE: How to Buy a PC Monitor

Comparing professional displays is difficult because they take different approaches to their design goals. For this review of the PE320QXT, I’ve laid out the results and charts with comments in the same areas that I normally test.

Pixel Response and Input Lag

Click here to read up on our pixel response and input lag testing procedures.

· Response Time Full black to white transition – 7.93ms

· Absolute Input Lag Full black to white transition – 26ms

Though I can’t recommend the PE320QXT for high-speed gaming, it performs better than many 60 Hz panels I’ve tested. The response time is very quick at just under 8ms. There is some motion blur but not as much as you’d expect. The overdrive helps somewhat, but gaming should be kept to slower-paced titles for best results. Doom Eternal will go a little soft when the action ramps up.

Input lag is 26ms, which is slower than typical gaming monitors but faster than typical human reaction times. Obviously, a skilled gamer will be hampered by that much delay, but casual gaming is well within the PE320QXT’s wheelhouse.

Test Takeaway: You can play games on the PE320QXT if you take its limitations into account. At 60 Hz, there will be some motion blur. And input lag isn’t super low, but it isn’t super high either. The overdrive is effective at reducing some of that softness. Though there is no Adaptive-Sync, you’ll rarely see a frame tear if your PC can run 6K at 60fps.

Viewing Angles

The PE320QXT has some of the best off-axis image quality of any IPS screen I’ve tested. The side view would fool anyone into thinking it’s an OLED. There is no visible color shift, nor is there a change to brightness or gamma. This is important given its design intent. The giveaway comes in the vertical view where you can see a red shift. But gamma and brightness aren’t significantly different. The PE320QXT is designed to be shared, and it easily can be as these results show

Screen Uniformity

To learn how we measure screen uniformity, click here.

· Screen Uniformity Deviation From Center 0% Black Field – 11.28%

I noted some slight glow around the edges of my PE320QXT sample, which put its deviation score over the visible threshold of 10%. A lot is going on here with the extra Quantum Dot and capacitive touch screen layers in play, so this result is not surprising.

MORE: Best Gaming Monitors

MORE: How We Test PC Monitors

MORE: How to Buy a PC Monitor

To read about our monitor tests in-depth, please check out Display Testing Explained: How We Test PC Monitors. We cover brightness and contrast testing on page two.

Maximum Backlight Level

· Maximum White Luminance General Mode – 346.3619 nits

· Maximum Black Luminance General Mode – 0.2194 nit

· Maximum Contrast Ratio General Mode – 1,578.4:1

· Calibrated White Luminance General Mode – 206.9276

· Calibrated Black Luminance General Mode – 0.2125 nit

· Calibrated Contrast Ratio General Mode – 1,621.4:1

· ANSI Contrast General Mode – 1,542.8:1

The PE320QXT doesn’t have local or zone dimming, so measurements of full field and window patterns are the same. SDR brightness tops out at 346 nits, which is plenty of light for any indoor environment. Given the shiny screen, I would recommend using higher brightness settings to keep the image from being affected by reflections. Black levels are respectable for an IPS screen, resulting in an above-average contrast ratio of 1,578.4:1. This is excellent performance.

When I calibrated the General mode, I had to reduce the contrast slider to solve a clipping issue, but the ratio actually increased to 1,621.4:1, a nice gain. ANSI contrast (intra-image) is also solid at 1,542.8:1. The picture has a nice depth and texture, and though it won’t match an OLED, it is visibly superior to most IPS monitors.

Test Takeaway: The PE320QXT has plenty of light output and excellent black levels and contrast for an IPS screen with above-average scores in all areas. My only complaint is that there’s no dimming available to increase dynamic range. Adding a full-array Mini LED backlight would take it to another level.

MORE: Best Gaming Monitors

MORE: How We Test PC Monitors

MORE: How to Buy a PC Monitor

To verify the PE320QXT’s color accuracy, I tested grayscale, gamma, and gamut tracking for the Color Space modes that match commonly used standards. I noted that they cannot be calibrated in the OSD except for General, which uses the monitor’s full native gamut. The charts are below, and at the end of this page is a table summarizing all the error values.

Grayscale and Gamma Tracking

Our grayscale and gamma tests use Calman calibration software from Portrait Displays. We describe our grayscale and gamma tests in detail here.

The PE320QXT’s default color space in the User mode is General with a 2.2 gamma and D65 color temp (Warm setting). It runs a tad cool with barely visible errors at 90 and 100% brightness. You won’t see a problem in most content. Gamma is a tad light as well. I tweaked the RGB gains to visual perfection, though gamma is unchanged. Overall, though, the picture is excellent, more than enjoyable for general use.

The other modes are fixed and cannot be adjusted in the OSD. They all have slight errors in grayscale tracking, being either a tad cool or a tad warm. The furthest off the mark is HDR (BT.2020), which is very warm in tone. This will manifest later in the HDR tests. In all cases, gamma is either on point or a little light.

Color Gamut Accuracy

Our color gamut and volume testing use Portrait Displays’ Calman software. For details on our color gamut testing and volume calculations, click here.

Color tracking takes a middle road between P3 and BT.2020. The PE320QXT is a P3+ monitor thanks to its Quantum Dot layer. But note the direction of the green hue. It tends towards BT.2020. This is a compromise that keeps color from being too garish while taking advantage of that bonus volume. This creates a more natural look. I noted that Adobe RGB was on point for saturation and only showed slight hue errors in cyan and magenta. The PE320QXT has enough green to qualify as a true Adobe RGB display. Many other pro screens can’t make that claim.

Grayscale, Gamma and Color Gamut Test Summary

Below is a table of all the color space options’ results. Volume figures are impressive, especially for Adobe RGB and BT.2020, where the PE320QXT fills more than nearly all its competitors. Gamma runs a tad light and varies anywhere from 1.36 to 4.54% from its intended reference point. Grayscale errors are right at the visual threshold with a few slight issues but nothing significantly wrong. Gamma range values are very tight with very few variations.

Test Takeaway: The PE320QXT is a color-accurate monitor with a good selection of modes for professional use. It can’t be calibrated in the OSD, though, which might be an issue for long-term maintenance of standard references. It also lacks a P3 Cinema mode, which could be a problem for video post-production. In the General color space, it calibrates to a very high standard. It also has more color volume than just about any other professional display I’ve reviewed.

MORE: Best Gaming Monitors

MORE: How We Test PC Monitors

MORE: How to Buy a PC Monitor

Our HDR benchmarking uses Portrait Displays’ Calman software. To learn about our HDR testing, see our breakdown of how we test PC monitors.

The PE320QXT supports HDR10 content with two modes. I noted that it would not switch automatically to HDR mode when a signal was applied.

HDR Brightness and Contrast

· HDR White Luminance – 424.9390 nits

· HDR Black Level – 0.2125 nit

· HDR Sequential Contrast – 2,000.2:1

The PE320QXT is rated for VESA DisplayHDR 600, but I could not get my sample brighter than 425 nits. There is no local dimming available, but since contrast is higher than SDR at 2,000:1, it is logical to conclude that some field dimming is taking place. Measuring window patterns returns the same result as full fields. The result is that HDR is only slightly more impactful than SDR. The PE320QXT would really benefit from a full array Mini LED backlight.

Grayscale, EOTF and Color

The BT.2020 grayscale errors I observed in the SDR tests are also present for HDR. There is a very warm tone here that cannot be corrected in the OSD. The EOTF tracks close to the reference with slight darkness from 10% brightness up to the tone map transition at 65%. This is the correct value given the measured black and white levels. The only issue I noted was lightness between zero and 10%. Shadow detail is well rendered but not at black as it should be.

The PE320QXT’s color tests show much better results with linear oversaturation and hue points that are close to their targets. The DCI-P3 gamut is used fully while BT.2020 covers more than other professional monitors I’ve tested. The PE320QXT runs out of color at 90% red, 80% green, and 98% blue. With over 81% coverage of 2020, it’s one of the most colorful monitors you can buy.

Test Takeaway: The PE320QXT does a decent job with HDR thanks to solid luminance tracking. But it leaves dynamic range under the table with its edge backlight. It also has a warm grayscale, which means neutral tones aren’t quite neutral. Color is the best part with vivid hues and accurate gamut tracking. It also fills more of the BT.2020 gamut than just about any other monitor.

MORE: Best Gaming Monitors

MORE: How We Test PC Monitors

MORE: How to Buy a PC Monitor

When shopping for a professional monitor, it’s important to consider what it will be used for. The most common category is color reference, where you’ll be creating video and photography. There, accuracy and flexibility are paramount. You must have reliable color modes and the ability to easily adjust them when needed. And if you’re creating game content, you need fast refresh, speed video processing and Adaptive-Sync.

But if you want to conceptualize and present, you need things like a flexible stand, a touchscreen and a webcam for remote collaboration. You also need good viewing angles, so sharing doesn’t leave some users looking at different colors. The Acer ProDesigner PE320QXT is made precisely for those purposes.

Though I noted some discrepancies in grayscale tracking, the PE320QXT displays solid accuracy out of the box. The only thing missing there is an easy way to calibrate in the OSD. I noted that the General color space did allow calibration to a very high standard. HDR color also showed a few hiccups in the grayscale test where neutral tones were visibly warm. But color and luminance tracing were exemplary. The PE320QXT is also missing the gaming element with no Adaptive-Sync and a 60 Hz refresh rate. But its 6K resolution and massive color gamut deliver a stunning image when gameplay isn’t too twitchy.

Not only did image quality shine, but its presentation and design features were impressive. The touchscreen element worked without issue and was a real value-add for artists and designers. The included stylus was a nice touch, as was the integrated webcam, which makes for easy remote collaboration. And the stand was truly useful with its 60-degree up angle. A large touchscreen that you can also draw on is a real plus for digital art.

If you need a large monitor that can function as a meeting place, a design tool, an artist’s easel or just as a really nice display, the Acer ProDesigner PE320QXT fills the bill. At $1,800, it’s also a decent value when compared to other pro monitors. Those looking for something different should definitely check it out.

MORE: Best Gaming Monitors

MORE: How We Test PC Monitors

MORE: How to Buy a PC Monitor